Trap Host - netsys G.SHDSL.bis 3010E User Manual

>> edit Edit community entry
list Show community configuration
Move the cursor to edit and press enter.
-----------------------------------------------------------------------------
Command: ... 2 edit <Disable|Enable> <string> <Read_Only|Read_Write|Denied>
Message: Please input the following information.
Validate (TAB Select) <Enable>: Enable
Community (ENTER for default) <private>:
Access right (TAB Select) <Denied>:
-----------------------------------------------------------------------------
You can setup the following:
Validate: Set Enable or Disable.
Community: Key in the string which is serves as password for access right.
Access right: Set Read only, Read Write or Denied
Read_Only
Read_Write
Denied
Move the cursor to list and press enter, you can view full listing on SNMP Community Pool.
5 entries of SNMP trap are allowed to be configured in this system.
SNMP Community:
SNMP entry(1~5)
Validate □Enable
Community
Access Right : □Read only
4.10.3.2
There have 5 entries of SNMP trap are allowed to be configured in this system. Move the cursor to trap and
press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit Edit trap host parameter
list Show trap configuration
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Access read only
Access read and write
Deny all access
□Disable
□Read Write

Trap host

94
□Denied