Table of Contents
Advertisement
2.2.4 Power connection
Make sure you are using the correct power source as the AC/DC adapter. Inset the female end of power
adapter's cord into the power receptacle on the rear panel. Connect the power adapter to an appropriate
power source.
2.2.5 Reset Button
The reset button can be used only in one of two ways.
(1) Press the Reset Button for two second will cause system reboot.
(2)
Pressing the Reset Button for eight seconds will cause the product loading the factory default setting
and losing all of yours configuration. When you want to change its configuration but forget the user name or
password, or if the product is having problems connecting to the Internet and you want to configure it again
clearing all configurations, press the Reset Button for eight seconds with a paper clip or sharp pencil.
2.2.6 Protective Earth (Frame Ground) terminal
The marked lug or terminal should be connected to the building protective earth bus.
The function of protective earth does not serve the purpose of providing protection against electrical shock,
but instead enhances surge suppression on the DSL lines for installations where suitable bonding facilities
exist.
The connector type is M3 machine screw.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
15
Advertisement
Table of Contents
