Table of Contents
Advertisement
Trigger VLAN function (TAB Select) <Disable>:
-----------------------------------------------------------------------------
VLAN Mode:
VLAN Mode
□Disable
4.4.3.2
To modify the VLAN rule, move the cursor to modify and press enter.
-----------------------------------------------------------------------------
Command: setup vlan modify <1~8> <0~4094> <string>
Message: Please input the following information.
VLAN table entry index <1~8>: 1
VID value (ENTER for default) <1>: 10
VLAN port membership (ENTER for default) <111111>:
-----------------------------------------------------------------------------
The VLAN Port membership represents with string 1 or 0.
VLAN port membership is a 6-digit binary number in which bit 0 to bits 5 represents LAN1 to LAN4, DSL and
Sniffing ports respectively.
For example: [ setup vlan modify 1 10 111111 ] means use index as 1 , VID = 10 and all six ports are as same
membership (VLAN ID=10).
Use PVID command to change the member port to untagged members:
-----------------------------------------------------------------------------
Command: setup vlan pvid <1~6> <1~4094>
Message: Please input the following information.
Port index <1~6>:
VID value (ENTER for default) <1>:
-----------------------------------------------------------------------------
PVID (Port VID) : It is an untagged member from 1 to 4094 of default VLAN.
For example:
[ set vlan pvid 1 100]
[ set vlan pvid 2 100]
[ set vlan pvid 3 100]
[ set vlan pvid 4 100]
[ set vlan pvid 5 100]
[ set vlan pvid 6 100]
Those means all untagged on all ports are as same membership (VLAN ID=100)
To modify the link type of the port, move the cursor to link_mode and press enter. There are two types of link:
access and trunk. Trunk link will send the tagged packet form the port and Access link will send un-tagged
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
□802.1Q Tag VLAN
802.11Q VLAN
73
□Port Based VLAN
Advertisement
Table of Contents
