Status; Shdsl .Bis Efm - netsys G.SHDSL.bis 3010E User Manual

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2

3.6 Status

When you click STATUS You can monitor the following : SHDSL.bis EFM, MGMT and LAN.

3.6.1 SHDSL .Bis EFM

SHDSL.bis status including run-time device status : SHDSL.bis mode and Line Rate and Performance
information: SNR margin, attenuation and CRC error count.
4-pairs model (8 wire model)will showed as following, you can know about their four channel run-time
status( from channel 1 to 4).
Below display screen is come from four pair model(8 wire model):
If two EFM modem have been linking together, you can know about their run-time line rate status and
performance information from this screen.
Note: CPE side's line rate according to the setting of CO side.
If you want to clear the performance data on ERC Error Count, click Clear CRC Error is O.K.
48