Administration; User Profile - netsys G.SHDSL.bis 3010E User Manual

4.10 Administration

You can modify the user profile, telnet access, SNMP (Simple Network Management Protocol) and supervisor
information (supervisor password and ID) in admin.
For configuration the parameters, move the cursor " >> " to admin and press enter.
>> user Manage user profile
security Setup system security
snmp Configure SNMP parameter
passwd Change supervisor password
id Change supervisor ID
user
security
snmp
passwd
id

4.10.1 User Profile

You can use user command to clear, modify and list the user profile. You can setup at most five users to
access the EFM modem via console port or telnet in user profile table however users who have the supervisor
password can change the configuration of the EFM modem. Move the cursor " >> " to user and press enter
key.
>> clear Clear user profile
modify Modify the user profile
list List the user profile
You can delete the user by number using clear command. If you do not make sure the number of user, you
can use list command to check it. Modify command is to modify an old user information or add a new user to
user profile.
To modify or add a new user, move the cursor " >> " to modify and press enter.
Select which profile number you want to modify.
----------------------------------------------------------------------
Command: admin user modify <1~5> <more...>
Message: Please input the following information.
Legal access user profile number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Change User name and Password
Change supervisor password
Change supervisor ID
90