Table of Contents
Advertisement
----------------------------------------------------------------------
Command: setup mgmt 1 address <ip> <netmask>
Message: Please input the following information.
IP address (ENTER for default) <192.168.1.1>:
Subnet mask (ENTER for default) <255.255.255.0>:
----------------------------------------------------------------------
MGMT interface:
IP Address
Subnet Mask
4.4.7 DHCP
Dynamic Host Configuration Protocol (DHCP) is a communication protocol that lets network administrators to
manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's
network. Using the Internet Protocol, each machine that can connect to the Internet needs an unique IP
address. When an organization sets up its computer users with connection to the Internet, an IP address must
be assigned to each machine.
Without DHCP, the IP address must be entered manually at each computer. If computers move to another
location in another part of the network, a new IP address must be entered. DHCP lets a network administrator
to supervise and distribute IP addresses from a central point and automatically sends a new IP address when
a computer is plugged into a different place in the network.
4.4.7.1 DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a communication protocol that lets network administrators to
manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's
network. Using the Internet Protocol, each machine that can connect to the Internet needs a unique IP
address. When an organization sets up its computer users with a connection to the Internet, an IP address
must be assigned to each machine.
Without DHCP, the IP address must be entered manually at each computer. If computers move to
another location in another part of the network, a new IP address must be entered. DHCP lets a
network administrator to supervise and distribute IP addresses from a central point and automatically
sends a new IP address when a computer is plugged into a different place in the network.
To configure DHCP server, move the cursor to dhcp and press enter.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
82
Advertisement
Table of Contents
