4.1.2 Telnet login
The EFM modem also supports telnet for remote management.
Make sure the correct Ethernet cable connected the MGMT port of EFM modem to your computer. The
MGMT indicator on the front panel shall light if a correct cable is used. Starting your Telnet client with VT100
terminal emulation and connecting to the management IP of EFM modem, wait for the login prompt appears.
Input User and Password after login screen pop up. The system asks for User and Password, please enter
"admin" both for the factory default password. As show in the following:
User: admin
Password: *****
Note: The default IP address is 192.168.1.1. So that the line command is "telnet 192.168.1.1" on DOS mode.
4.1.3 Menu Driven Interface Commands
Before changing the configuration, familiarize yourself with the operations list in the following table. The
operation list will be shown on the window.
Menu Driven Interface Commands:
Keystroke
[UP] or I
[DOWN] or K
[LEFT] or J
[RIGHT] , L or [ENTER]
[HOME]or U
[END] or O
[TAB]
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Description
Move to above field in the same level menu.
Move to below field in the same level menu.
Move back to previous menu.
Move forward to submenu.
Move to first field
Move to last field
To choose another parameters.
62