Rate; Mgmt - netsys G.SHDSL.bis 3010E User Manual

4.4.5

RATE

Move the cursor " >> " to Rate and press enter.
-----------------------------------------------------------------------------
>> port
list
-----------------------------------------------------------------------------
Select which port you want to modify and then set up the data rate.
-----------------------------------------------------------------------------
Command: setup rate port <1~5> <0~22>
Message: Please input the following information.
Port index <1~5>: 1
rate (ENTER for default) <0>:
-----------------------------------------------------------------------------
The date rate is multiple of 1024kbps with the setup rate.
Rate Control per port:
Port 1 LAN1
Port 2 LAN2
Port 3 LAN3
Port 4 LAN4
Port 5 DSL

4.4.6 MGMT

Move the cursor " >> " to mgmt and press enter.
MGMT interface parameters can be configured MGMT IP address and subnet mask.
----------------------------------------------------------------------
Command: setup mgmt <1~1> <more...>
Message: Please input the following information.
Interface number <1~1>:
----------------------------------------------------------------------
The EFM modem only has one MGMT interface can use, so that use the default interface number is 1.
The default IP address and subnet mask are 196.168.1.1 and 255.255.255.0 .
>> address MGMT IP address and subnet mask
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
Modify port rate
Show Rate Control configuration
81