Snmp; Community - netsys G.SHDSL.bis 3010E User Manual

3
4
5
6
7
8
9
10
11
12
13
14
15
16

4.10.3 SNMP

Simple Network Management Protocol (SNMP) is the protocol not only governing network management, but
also the monitoring of network devices and their functions.
SNMP provides for the exchange of messages between a network management client and a network
management agent for remote management of network nodes. These messages contain requests to get and
set variables that exist in network nodes in order to obtain statistics, set configuration parameters, and
monitor network events. SNMP communications can occur over the LAN or WAN connection.
The EFM modem can generate SNMP traps to indicate alarm conditions, and it relies on SNMP community
strings to implement SNMP security. This EFM Modem support MIB I & II.
Move the cursor " >> " to snmp and press enter.
>> community Configure community parameter
trap Configure trap host parameter
4.10.3.1
There are 5 number entries of SNMP community can be configured in this system. Move the cursor to
community and press enter.
----------------------------------------------------------------------
Command: admin snmp community <1~5> <more...>
Message: Please input the following information.
Community entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2

Community

93