2. WRR Configuration
If the user chooses "Type 1" in "Scheduling Configuration" section, then the information in "WRR
Configuration" section is required to be filled in. Users are able to assign from 1 to 15 for the value of a
weight for each queue.
3. WFQ Configuration
If users choose to apply "Type 2" or "Type 3" as the QoS algorithm, users should assign the bandwidth for
each queue in each port.
4.
Port Based Priority
The last step is to assign queues with their corresponding ports, LAN 1, LAN 2, LAN 3, LAN 4, DSL and
Sniffing.
Example:
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
40