Config Tool - netsys G.SHDSL.bis 3010E User Manual

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2

3.8.2 CONFIG Tool

This configuration tool has three functions: load Factory Default, Restore Configuration, and Backup
Configuration.
Press CONFIG TOOL, you can view the following:
Choose the function and then press Finish.
Load Factory Default: It will load the factory default parameters to the EFM modem.
Note: This action will change all of the settings to factory default. On the other hand, you will lose all the
existing configured parameters.
Restore Configuration:
In case of the configuration crushed occasionally, it will help you to recover the backup configuration easily.
Click Finish after selecting Restore Configuration.
Browse the route of backup file then press finish. The EFM modem will automatically restore the saved
configuration.
Backup Configuration:
After configuration, suggest using the function to back up your EFM modem parameters in the PC. Select the
Backup Configuration and then press Finish. Browse the place of backup file named backup. Press Finish.
The EFM modem will automatically backup the configuration.
58