Default; Status - netsys G.SHDSL.bis 3010E User Manual

----------------------------------------------------------------------
Command: setup hostname <name>
Message: Please input the following information.
Local hostname (ENTER for default) <SOHO>: test
----------------------------------------------------------------------
The host name can't use more than 15 characters and don't use space character.
Host Name:
Host Name

4.4.10 Default

If you want to restore factory default, first move the cursor " >> " to default and then press enter.
----------------------------------------------------------------------
Command: setup default <name>
Message: Please input the following information.
Are you sure? (Y/N): y
----------------------------------------------------------------------

4.5 Status

You can view running system status of SHDSL.bis and interface via status command.
Move cursor " >> " to status and press enter.
>> shdsl.bis Show SHDSL.bis status
Show interface statistics status
interface
Command Description
shdsl.bis The SHDSL.bis status includes mode, line rate, SNR margin, attenuation, and
CRC error count of the local side modem, and SNR margin, attenuation and
CRC error count of remote side modem. The modem can access remote side
information via EOC (embedded operation channel).
interface The statistic status of MGMT interface can be monitor by interface command.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
85