netsys G.SHDSL.bis 3010E User Manual page 35

(1)
Group ID = 1
This group is allowed to manage the EFM modem. LAN1, LAN2 and DSL are in this group.
Only LAN2 (in "Tunnel" mode) will check the VLAN ID of incoming packets. The VLAN ID
should be equal to 10 and its TPID should be "0x8100".
(2)
Group ID = 2
This group is allowed to manage the EFM modem. LAN3 and LAN4 are in this group. This rule
will not check any VLAN ID from any group member (both ports are "Access").
(3)
Group ID = 3
This group is not allowed to manage the EFM modem. LAN1, LAN2, LAN4 and DSL are in this
group. Only packets with VLAN ID = 10 and TPID = 0x8100 can access LAN2; otherwise, packets
which do not meet this requirement will be dropped.
3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User's Manual Ver:A2
35