Stored Settings - AVT Pike Technical Manual

Configuration of the camera
Standard registers
Cur_V_Frm_Rate
Cur_V_Mode
Cur_V_Format
ISO_Channel
ISO_Speed
BRIGHTNESS
AUTO_EXPOSURE (Target grey level)
SHARPNESS
WHITE_BALANCE (+ auto on/off)
HUE (+ hue on)
SATURATION (+ saturation on)
GAMMA (+ gamma on)
SHUTTER (+ auto on/off)
GAIN
TRIGGER_MODE
TRIGGER_POLARITY
TRIGGER_DELAY
ABS_GAIN

Stored settings

The following table shows the settings stored inside a profile:
Standard registers
(Format_7)
IMAGE_POSITION (AOI)
IMAGE_SIZE (AOI)
COLOR_CODING_ID
BYTES_PER_PACKET
Table 162: User profile: stored settings
The user can specify which user profile will be loaded upon startup of the
camera.
This frees the user software from having to restore camera settings, that dif-
fer from default, after every cold start. This can be especially helpful if third
party software is used which may not give easy access to certain advanced
features or may not provide efficient commands for quick writing of data
blocks into the camera.
Advanced registers
TIMEBASE
EXTD_SHUTTER
IO_INP_CTRL
IO_OUTP_CTRL
IO_INTENA_DELAY
AUTOSHUTTER_CTRL
AUTOSHUTTER_LO
AUTOSHUTTER_HI
AUTOGAIN_CTRL
AUTOFNC_AOI (+ on/off)
COLOR_CORR (on/off + color correction
coefficients)
TRIGGER_DELAY
MIRROR_IMAGE
HIGH_SNR
LUT_CTRL (LutNo; ON_OFF is not saved)
SHDG_CTRL (on/off + ShowImage)
DEFERRED_TRANS (HoldImg +
NumOfImages)
CHANNEL_ADJUST_CTRL
CHANNEL_ADJUST_VALUE
PIKE Technical Manual V4.1.0
307