Extended Version Information Register - AVT Pike Technical Manual

Configuration of the camera
Register Register name
0x1100000 PARRAMLIST_INFO
0x1101000 PARAMLIST_BUFFER
0x1002000 AFEREFERENCES
Register Name
0xF1000010 VERSION_INFO1
0xF1000014 VERSION_INFO1_EX µC version
0xF1000018 VERSION_INFO3
0xF100001C VERSION_INFO3_EX FPGA version
0xF1000020
0xF1000024
0xF1000028
0xF100002C
0xF1000030
0xF1000034
Table 122: Advanced register: Extended version information
Table 121: Advanced registers summary
Note Advanced features should always be activated before access-
ing them.
Note
• Currently all registers can be written without being
activated. This makes it easier to operate the camera
using Directcontrol.
• AVT reserves the right to require activation in future
versions of the software.

Extended version information register

The presence of each of the following features can be queried by the 0 bit of
the corresponding register.
Field
µC type ID
µC version
Camera type ID
FPGA version
---
---
---
---
OrderIDHigh
OrderIDLow
Remarks
see Chapter Parameter-List Update
see Chapter User adjustable gain references
page 310
Bit
[0..15]
[16..31]
[0..31]
[0..15]
[16..31]
[0..31]
[0..31]
[0..31]
[0..31]
[0..31]
[0..31]
[0..31]
on page 296
on
Description
Always 0
Bcd-coded version number
Bcd-coded version number
See Table 123: Camera type
ID list on page 267.
Bcd-coded version number
Bcd-coded version number
Reserved
Reserved
Reserved
Reserved
8 Byte ASCII Order ID
PIKE Technical Manual V4.1.0
266