High Snr Mode (High Signal Noise Ratio) - AVT Pike Technical Manual

Configuration of the camera
Register Name
0xF1000520 HIGH_SNR
Table 145: Advanced register: High Signal Noise Ratio (HSNR)
Note When SOFT_RESET has been defined, the camera will respond
to further read or write requests but will not process them.

High SNR mode (High Signal Noise Ratio)

With High SNR mode enabled the camera internally grabs GrabCount images
and outputs a single averaged image.
Field
Presence_Inq
---
ON_OFF
---
GrabCount
Note The camera must be idle to toggle this feature on/off.
Bit Description
[0] Indicates presence of this feature
(read only)
[1..5] Reserved
[6] High SNR mode on/off
[7..22] Reserved
[23..31] Number of images (min. 2)
n
2 images with n=1..8 (automati-
cally)
PIKE Technical Manual V4.1.0
291