Status And Control Register For Feature - AVT Pike Technical Manual

Configuration of the camera
Offset Name
800h BRIGHTNESS

Status and control register for feature

The OnePush feature, WHITE_BALANCE, is currently implemented. If this flag
is set, the feature becomes immediately active, even if no images are being
input (see Chapter One-push automatic white balance
Field
Presence_Inq
Abs_Control
---
One_Push
ON_OFF
A_M_Mode
---
Value
Table 118: Feature control register
Bit Description
[0] Presence of this feature
0: N/A
1: Available
[1] Absolute value control
0: Control with value in the Value field
1: Control with value in the Absolute
value CSR
If this bit = 1, value in the Value field is
ignored.
[2-4] Reserved
[5] Write 1: begin to work (Self cleared after
operation)
Read: Value=1 in operation
Value=0 not in operation
If A_M_Mode =1, this bit is ignored.
[6] Write: ON or OFF this feature
Read: read a status
0: OFF, 1: ON
If this bit =0, other fields will be read
only.
[7] Write: set the mode
Read: read a current mode
0: Manual
1: Auto
[8-19] Reserved
[20-31] Value.
Write the value in Auto mode, this field
is ignored.
If ReadOut capability is not available,
read value has no meaning.
on page 99).
PIKE Technical Manual V4.1.0
257