Look-Up Tables (Lut) - AVT Pike Technical Manual

Configuration of the camera
Register Name
0xF1000240 LUT_CTRL
0xF1000244 LUT_MEM_CTRL
0xF1000248 LUT_INFO

Look-up tables (LUT)

Load the look-up tables to be used into the camera and choose the look-up
table number via the LutNo field. Now you can activate the chosen LUT via
the LUT_CTRL register.
The LUT_INFO register indicates how many LUTs the camera can store and
shows the maximum size of the individual LUTs.
The possible values for LutNo are 0..n-1, whereas n can be determined by
reading the field NumOfLuts of the LUT_INFO register.
Field
Presence_Inq
---
ON_OFF
---
LutNo
Presence_Inq
---
EnableMemWR
---
AccessLutNo
AddrOffset
Presence_Inq
---
BitsPerValue
NumOfLuts
MaxLutSize
Table 131: Advanced register: LUT
Bit Description
[0] Indicates presence of this
feature (read only)
[1..5] Reserved
[6] Enable/disable this feature
[7..25] Reserved
[26..31] Use look-up table with LutNo
number
[0] Indicates presence of this
feature (read only)
[1..4] Reserved
[5] Enable write access
[6..7] Reserved
[8..15] Reserved
[16..31] byte
[0] Indicates presence of this
feature (read only)
[1..2] Reserved
[3..7] Bits used per table item
[8..15] Maximum number of look-up
tables
[16..31] Maximum look-up table size
(bytes)
PIKE Technical Manual V4.1.0
276