Test Images; Loading Test Images; Test Images For B/W Cameras - AVT Pike Technical Manual

How does bandwidth affect the frame rate?

Test images

FirePackage
1. Start SmartView.
2. Click the Edit settings
button.
3. Click Adv1 tab.
4. In combo box Test images
choose Image 1 or another
test image.

Loading test images

Direct FirePackage
1. Start SmartView for WDM.
2. In Camera menu click
Settings.
3. Click Adv1 tab.
4. In combo box Test images
choose Image 1 or another
test image.
Table 101: Loading test images in different viewers

Test images for b/w cameras

The b/w cameras have two test images that look the same. Both images show
a gray bar running diagonally (mirrored at the middle axis).
• Image 1 is static.
• Image 2 moves upwards by 1 pixel/frame.
Figure 103: Gray bar test image
Fire4Linux
1. Start cc1394 viewer.
2. In Adjustments menu click
on Picture Control.
3. Click Main tab.
4. Activate Test image check
box on.
5. In combo box Test images
choose Image 1 or another
test image.
PIKE Technical Manual V4.1.0
228