Example - AVT Pike Technical Manual

Configuration of the camera

Example

To map the internal Format_7 Mode_19 to the visible Format_7 Mode_1,
write the decimal number 19 to the above listed F7MODE_1 register.
Note For available Format_7 modes see
sible Format_7 modes to F7M1...F7M7
Setting the F7MODE_x register to:
• -1 forces the camera to use the factory defined mode
• -2 disables the respective Format_7 mode (no mapping
is applied)
After setup of personal Format_7 mode mappings you have to
reset the camera. The mapping is performed during the cam-
era startup only.
Figure 79: Mapping of pos-
on page 134.
PIKE Technical Manual V4.1.0
298