Maximum Resolution; Time Base - AVT Pike Technical Manual

Configuration of the camera
Register Name
0xF1000200 MAX_RESOLUTION
Table 126: Advanced register: Maximum resolution inquiry
Register Name
0xF1000208 TIMEBASE

Maximum resolution

This register indicates the highest resolution for the sensor and is read-only.
Note This register normally outputs the MAX_IMAGE_SIZE_INQ
Format_7 Mode_0 value.
This is the value given in the specifications tables under
Picture size (max.) in Chapter
Field
MaxHeight
MaxWidth

Time base

Corresponding to IIDC, exposure time is set via a 12-bit value in the corre-
sponding register (SHUTTER_INQ [51Ch] and SHUTTER [81Ch]).
This means that you can enter a value in the range of 1 to 4095.
PIKE cameras use a time base which is multiplied by the shutter register
value. This multiplier is configured as the time base via the TIMEBASE regis-
ter.
Field
Presence_Inq
---
ExpOffset
---
Timebase_ID
Table 127: Advanced register: Time base
The time base IDs 0-9 are in bit [28] to [31]. See
page 273.
Default time base is 20 µs: This means that the integration time can be
changed in 20 µs increments with the shutter control.
Specifications
Bit Description
[0..15] Sensor height
(read only)
[16..31] Sensor width
(read only)
Bit Description
[0] Indicates presence of this
feature (read only)
[1..7] Reserved
[8..19] Exposure offset in µs
[20..27] Reserved
[28..31] See Table 128: Time base ID
on page 273.
Table 128: Time base ID
PIKE Technical Manual V4.1.0
on page 42ff.
on
272