Parameter-List Update - AVT Pike Technical Manual

Configuration of the camera
Register Name
0xF1100000 PARAMLIST_INFO
0x1101000 PARAMLIST_BUFFER
...
0x1101nnn
Table 150: Advanced register: Parameter-List Update: parameter list

Parameter-List Update

The parameter list is an array of address/data pairs which can be sent to the
camera in a single bus cycle.
Field
Presence_Inq
---
BufferSize
Dependant on the parameter update mode the address/data pairs may
become active one by one or after the processing of the complete parameter
list. A parameter list may look like follows (the description is for your con-
venience):
Address offset
0xF0F00608
0xF0F00604
0xF0F08008
0xF0F0800C
0xF0F08044
0xF0F0080C
0xF0F00820
Table 151: Example: parameter list
Note
• The PARAMLIST_BUFFER shares the memory with the
GPDATA_BUFFER. Therefore it is not possible to use
both features at the same time.
• Not all CSRs or features of a particular camera model
can be used with the parameter list feature.
Bit Description
[0] Indicates presence of this feature
(read only)
[1..15] Reserved
[16..31] Size of parameter list buffer in
bytes
Data quadlet
0xE0000000
0x00000000
0x00000000
0x028001E0
0x04840484
0x80000100
0x80000080
Description
Set video format 7
Set video mode 0
Set image position
Set image size
Set BytePerPacket value
Set shutter to 0x100
Set gain to 0x80
PIKE Technical Manual V4.1.0
296