Delayed Integration Enable - AVT Pike Technical Manual

Configuration of the camera
Register Name
0xF1000340 IO_INTENA_DELAY
Table 136: Advanced register: Delayed Integration Enable

Delayed Integration enable

A delay time between initiating exposure on the sensor and the activation
edge of the IntEna signal can be set using this register. The on/off flag acti-
vates/deactivates integration delay. The time can be set in µs in DelayTime.
Note
• Only one edge is delayed.
• If IntEna_Out is used to control an exposure, it is pos-
sible to have a variation in brightness or to precisely
time a flash.
Figure 107: Delayed integration timing
Field
Presence_Inq
---
ON_OFF
---
DELAY_TIME
Bit Description
[0] Indicates presence of this
feature (read only)
[1..5] Reserved
[6] Enable/disable integration
enable delay
[7..11] Reserved
[12..31] Delay time in µs
PIKE Technical Manual V4.1.0
284