Secure Image Signature (Sis); Advanced Register: Sis - AVT Pike Technical Manual

Configuration of the camera
Register Name
0xF1000630 SIS
0xF1000634
Table 153: Advanced register: secure image signature (SIS)

Secure image signature (SIS)

Secure image signature (SIS) is the synonym for data, which is inserted into
an image to improve or check image integrity.
All Pike models can insert
• Time stamp (1394 bus cycle time at the beginning of integration)
• Frame counter (frames read out of the sensor)
• Trigger counter (external trigger seen only)
• Various camera settings
into a selectable line position within the image. Frame counter and trigger
counter are available as advanced registers to be read out directly.

Advanced register: SIS

The SIS feature is controlled by the following advanced feature register:
Note This register is different to the Marlin time stamp (600) reg-
ister!
Field
Presence_Inq
---
ON_OFF
---
LineNo
UserValue
Enabling this feature, SIS data will be inserted into any captured image. The
size of SIS data depends on the selected SIS format.
The LineNo field indicates at which line the SIS data will be inserted.
Bit Description
[0] Indicates presence of this feature
(read only)
[1..5] Reserved
[6] SIS mode on/off
[7..15] Reserved
[16..31] SIS data position inside an image
[0..31] User provided value for sequence
mode to be placed into the SIS
area of an image
PIKE Technical Manual V4.1.0
299