End Of Exposure To First Packet On The Bus - AVT Pike Technical Manual

Controlling image capture

End of exposure to first packet on the bus

After the exposure, the CCD sensor is read out; some data is written into the
FRAME_BUFFER before being transmitted to the bus.
The time from the end of exposure to the start of transport on the bus is:
710 µs ± 62.5 µs
This time 'jitters with the cycle time of the bus (125 µs).
OneShot Command
Decode command
Integration-Start
Timebase Reg.
X
Shutter-Reg.
Offset
Processing Delay
First Packet on Bus
Figure 89: Data flow and timing after end of exposure
< 150 μs
Pike F-032: 17 µs
Pike F-100: 42 µs
Pike F-145: 38 µs
Pike F-145-15fps: 70 µs
Pike F-210: 42 µs
Pike F-421: 69 µs
Pike F-505: 26 µs
< 710 μs
+/-62.5 μs
PIKE Technical Manual V4.1.0
169