Account Code Set - Panasonic KX-TD816AL User Manual

2.2

Account Code Set

Allows you to assign the account code.
— Be sure that you are in Station Programming mode : Press [PROGRAM] [9] [9].
1
8
2
ID code
3
8
4
Location number
5
CLR
S1 S2
6
Account code
7
AUTO DIAL
STORE
8
REDIAL
or
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
2-16
Station Programming
Programming
1. Dial 8.
2. Enter the ID code (4 digits).
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 8.
4. Dial the location number (01 through 40) or press the NEXT (S3)
button until the location number is designated.
• If the account code has not been assigned, the display shows
"Not Stored."
5. Press the CLR (S2) button.
• The message of the display disappears.
6. Dial the new account code (Max. 5 digits).
S3
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button.
7. Press the STORE button.
• The display shows the new account code.
8. Press the REDIAL (PREV) or HOLD (END) button.
— REDIAL (PREV) button : To return to step 4.
HOLD
— HOLD (END) button : To return to the initial programming mode.
Charge Meter
xx : aaaaa
CLR NEXT
(xx : location number)
(—aaaaa: account code number)