Distinctive Ringing - Panasonic DBS 576 Technical Manual

Chapter 3. System Features
To make a DISA call to an outside number:
1. From an outside location, enter the DISA trunk number.
2. If an incoming DISA code is assigned enter the DISA code
(up to 10 digits). Otherwise, proceed to step 3.
3. Enter the Trunk group number (9 or 81-84)
4. Dial the phone number.
Hardware Requirements
• N/A
Related Programming
• FF1-0-26: DISA Incoming Code
• FF1-0-26: DISA Outgoing Codes and TRS Assignments
• FF1-0-04: Class of Service (DISA ID Check)
• FF2: Ring Type
Considerations
• Busy override cannot be used for a DISA line.
• DISA can be used to access extensions as well as outside numbers.
• Paging cannot be accessed from a DISA line.
• While dialing an extension number, the * key may be entered to cancel dialing and return to dial
tone. The # key may be entered to disconnect.

Distinctive Ringing

Description
Distinctive Ringing sets CO calls to ring with a distinctive ring based on the trunk. This "ring" also
identifies the call as an outside call instead of an inside call.
Beginning with CPC version 2.0, calls to a key telephone or DSLT can also be set to distinctive
ringing on an extension basis.
Hardware Requirements
• N/A
Related Programming
• FF2-0: (Trunks) Ring Pattern and Frequency
• FF3-0: (Extensions) Ring Pattern and Frequency
• FF1-0-04: (System) Trunk Class of Service
Considerations
3-28
Action
DBS 576 (USA) issued April 2002
Section 700 - Operation
Result
DISA dial tone
576-51-700