Zone Status - Cisco TelePresence Administrator's Manual

Zone status

The Zone status page (Status >
amount of bandwidth being used by each, and their current status.
The list of zones always includes the Default Zone, plus any other zones that have been created.
The following information is displayed:
Field Description
Name The names of each zone currently configured on this VCS.
Clicking on a zone Name takes you to the configuration page for that subzone.
Type The type of zone.
Calls The number of calls currently passing out to or received in from each zone.
Bandwidth The total amount of bandwidth used by all calls passing out to or received in from each zone.
used
H.323 / Indicates the zone's H.323 or SIP connection status:
SIP status
Off: the protocol is disabled at either the zone or system level
n
Active: the protocol is enabled for that zone and it has at least one active connection; if multiple
n
connections are configured and some of those connections have failed, the display indicates how
many of the connections are Active
On: applies to DNS and ENUM zones only and indicates that the protocol is enabled for that zone
n
Failed: the protocol is enabled for that zone but its connection has failed
n
Checking: the protocol is enabled for that zone and the system is currently trying to establish a
n
connection
Search This area is used to indicate if that zone is not a target of any search rules.
rule
status
Cisco VCS Administrator Guide (X7.2)
Zones) lists all of the external zones on the VCS, the number of calls and
Overview and status information
Page 38 of 498