Optional Features - Cisco TelePresence Administrator's Manual

Can function as a standalone VCS or be neighbored with other systems such as VCSs, Border Controllers,
n
gatekeepers and SIP proxies
n+1 redundancy, can be part of a cluster of up to 6 VCSs for increased capacity and redundancy
n
Intelligent Route Director for single number dialing and network failover facilities
n
Optional endpoint authentication (including AD authentication for Movi / Jabber Video clients)
n
Control over which endpoints are allowed to register
n
Call Policy (also known as Administrator Policy) including support for CPL
n
Can be managed with Cisco TelePresence Management Suite (TMS) 12.6 or later
n
AD authentication for administrators of the VCS
n
Pre-configured defaults for:
n
Cisco Unified Communications Manager neighbor zones
l
Cisco TelePresence Advanced Media Gateway
l
Microsoft Office Communications Server (OCS) 2007 / Lync neighbor zones
l
Nortel Communication Server neighbor zones
l
Embedded setup wizard using a serial port for initial configuration
n
System administration using a web interface or RS-232, Telnet, SSH, and HTTPS
n

Optional features

The following features are available on the VCS by the purchase and installation of the appropriate option
key:
FindMe™
FindMe is a unique industry solution that gives individual video users a single alias on which they can be
contacted regardless of location. Users have the ability to log on to a web-based interface and control where
and how they are contacted. The FindMe feature also includes support for Microsoft Office Communications
Server (OCS) 2007 / Lync 2010, which enables FindMe aliases to register as Microsoft Office Communicator
(MOC) / Lync clients, and MOC / Lync clients to view the presence status of FindMe aliases.
Cisco VCS Administrator Guide (X7.2)
Introduction
Page 14 of 498