Cisco TelePresence Administrator's Manual page 363

Adding H.350 objects
Create the organizational hierarchy:
1. Create an ldif file with the following contents:
# This example creates a single organizational unit to contain the H.350 objects
dn: ou=h350,dc=my-domain,dc=com
objectClass: organizationalUnit
ou: h350
2. Add the ldif file to the server using the command:
slapadd -l <ldif_file>
This organizational unit will form the BaseDN to which the VCS will issue searches. In this example the
BaseDN will be: ou=h350,dc=my-domain,dc=com.
It is good practice to keep the H.350 directory in its own organizational unit to separate out H.350 objects
from other types of objects. This allows access controls to be setup which only allow the VCS read access
to the BaseDN and therefore limit access to other sections of the directory.
Note: the SIP URI in the ldif file must be prefixed by sip:
Add the H.350 objects:
1. Create an ldif file with the following contents:
# MeetingRoom1 endpoint
dn: commUniqueId=comm1,ou=h350,dc=mydomain,dc=com
objectClass: commObject
objectClass: h323Identity
objectClass: h235Identity
objectClass: SIPIdentity
commUniqueId: comm1
h323Identityh323-ID: MeetingRoom1
h323IdentitydialedDigits: 626262
h235IdentityEndpointID: meetingroom1
h235IdentityPassword: mypassword
SIPIdentityUserName: meetingroom1
SIPIdentityPassword: mypassword
SIPIdentitySIPURI: sip:MeetingRoom@domain.com
2. Add the ldif file to the server using the command:
slapadd -l <ldif_file>
The example above will add a single endpoint with an H.323 ID alias of MeetingRoom1, an E.164 alias of
626262 and a SIP URI of MeetingRoom@domain.com. The entry also has H.235 and SIP credentials of
ID meetingroom1 and password mypassword which are used during authentication.
H.323 registrations will look for the H.323 and H.235 attributes; SIP will look for the SIP attributes. Therefore
if your endpoint is registering with just one protocol you do not need to include elements relating to the other.
For information about what happens when an alias is not in the LDAP database see Source of aliases for
registration in the Using an H.350 directory service lookup via LDAP
Cisco VCS Administrator Guide (X7.2)
Reference material
section.
Page 363 of 498