Cisco TelePresence Administrator's Manual page 463

OptionKeyCheck
Recheck the option keys on the VCS.
This command has no parameters.
Example: xCommand OptionKeyCheck
OptionKeyDelete
Deletes a software option key from the VCS.
OptionKeyId(r): <1..64>
Specifies the ID of the software option to be deleted.
Example: xCommand OptionKeyDelete OptionKeyId: 2
PipeAdd
Adds and configures a new pipe.
PipeName(r): <S: 1, 50>
Assigns a name to this pipe.
TotalMode: <Unlimited/Limited/NoBandwidth>
Determines whether or not this pipe is enforcing total bandwidth restrictions. NoBandwidth: no bandwidth
available; no calls can be made using this pipe. Default: Unlimited.
Total: <1..100000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the
pipe. Default: 500000.
PerCallMode: <Unlimited/Limited/NoBandwidth>
Determines whether or not this pipe is limiting the bandwidth of individual calls. NoBandwidth: no bandwidth
available; no calls can be made using this pipe. Default: Unlimited.
PerCall: <1..100000000> If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth
(in kbps) available for any one call. Default: 1920.
Example: xCommand PipeAdd PipeName: "512k ADSL" TotalMode: Limited Total: 512
PerCallMode: Limited PerCall: 128
PipeDelete
Deletes a pipe.
PipeId(r): <1..1000>
The index of the pipe to be deleted.
Example: xCommand PipeDelete PipeId: 2
Cisco VCS Administrator Guide (X7.2)
Reference material
Page 463 of 498