Cisco TelePresence Administrator's Manual page 420

Reference material
Policy FindMe UserDeviceRestriction: <Off/On>
Controls if users are restricted from adding, deleting or modifying their own devices.
Default: Off
Example: xConfiguration Policy FindMe UserDeviceRestriction: Off
Policy Services Service [1..20] DefaultCPL: <S: 0,255>
The CPL used by the VCS when the remote service is unavailable.
Default:
Example: xConfiguration Policy Services Service 1 DefaultCPL: "<reject status='403'
reason='Service Unavailable'/>"
Policy Services Service [1..20] Description: <S: 0,64>
A free-form description of the Policy Service.
Example: xConfiguration Policy Services Service 1 Description: "Conference management
service"
Policy Services Service [1..20] HTTPMethod: <POST/GET>
Specifies the HTTP method type to use for the remote service.
Default: POST
Example: xConfiguration Policy Services Service 1 HTTPMethod: POST
Policy Services Service [1..20] Name: <S: 0,50>
Assigns a name to this Policy Service.
Example: xConfiguration Policy Services Service 1 Name: "Conference handler"
Policy Services Service [1..20] Password: <S: 0,82>
Specifies the password used by the VCS to log in and query the remote service. The maximum plaintext length is
30 characters, which will then be encrypted.
Example: xConfiguration Policy Services Service 1 Password: "password123"
Policy Services Service [1..20] Path: <S: 0,255>
Specifies the URL of the remote service.
Example: xConfiguration Policy Services Service 1 Path: "service"
Policy Services Service [1..20] Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote service.
Default: HTTPS
Example: xConfiguration Policy Services Service 1 Protocol: HTTPS
Policy Services Service [1..20] Server [1..3] Address: <S: 0,128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote service.
Example: xConfiguration Policy Services Service 1 Server 1 Address: "192.168.0.0"
Policy Services Service [1..20] Status Path: <S: 0..255>
Specifies the path for obtaining the remote service status.
Default: status
Example: xConfiguration Policy Services Service 1 Status Path: status
Cisco VCS Administrator Guide (X7.2) Page 420 of 498