Cisco TelePresence Administrator's Manual page 273

For other components:
l
Upload to the /tmp/pkgs/new/ folder on the system, preserving the file name and extension, for
o
example: scp root@10.0.0.1:/tmp/pkgs/new/ocs-relay.tlp
3. Enter the root password when prompted.
The software installation begins automatically. Wait until the software has installed completely. This
should not take more than five minutes.
4. If you have upgraded the VCS platform component, log in to the VCS, either using the web interface or
CLI, and reboot the VCS. After about five minutes the system will be ready to use.
Note: if you make any further configuration changes before rebooting, those changes will be lost when the
system restarts, so you are recommended to reboot your system immediately.
Cisco VCS Administrator Guide (X7.2)
Maintenance
Page 273 of 498