Local Zone Status - Cisco TelePresence Administrator's Manual

Overview and status information

Local Zone status

The Local Zone status page
up the Local Zone. This always includes the Default Subzone and the Traversal Subzone, plus any other
subzones that have been configured.
The following information is displayed:
Field Description
Subzone The names of each subzone currently configured on this VCS.
name Clicking on a Subzone name takes you to the configuration page for that subzone.
Registrations The number of devices currently registered within the subzone. Note that devices cannot be
registered to the Traversal Subzone.
Calls The number of calls currently passing through the subzone. Note that a single call may pass
through more than one subzone, depending on the route it takes. For example, traversal calls
from a locally registered endpoint will always pass through the Traversal Subzone, so they will
show up twice; once in the originating subzone and once in the Traversal Subzone.
Bandwidth The total amount of bandwidth used by all calls passing through the subzone.
used
Cisco VCS Administrator Guide (X8.1.1)
(Status > Local Zone) lists all of the subzones on the VCS that together make
Local Zone status
Page 335 of 507