Cisco TelePresence Administrator's Manual page 440

Reference material
Zones Policy Mode: <SearchRules/Directory>
The mode used when attempting to locate a destination.
SearchRules: use the configured search rules to determine which zones are queried and in what order.
Directory: use the facilities of a directory service to direct the request to the correct zones.
Default: SearchRules
Example: xConfiguration Zones Policy Mode: SearchRules
Zones Policy SearchRules Rule [1..2000] Authentication: <Yes/No>
Specifies whether this search rule applies only to authenticated search requests.
Default: No
Example: xConfiguration Zones Policy SearchRules Rule 1 Authentication: No
Zones Policy SearchRules Rule [1..2000] Description: <S: 0,64>
A free-form description of the search rule.
Example: xConfiguration Zones Policy SearchRules Rule 1 Description: "Send query to the
DNS zone"
Zones Policy SearchRules Rule [1..2000] Mode: <AliasPatternMatch/AnyAlias/AnyIPAddress>
Determines whether a query is sent to the target zone.
AliasPatternMatch: queries the zone only if the alias matches the corresponding pattern type and string.
AnyAlias: queries the zone for any alias (but not IP address).
AnyIPAddress: queries the zone for any given IP address (but not alias).
Default: AnyAlias
Example: xConfiguration Zones Policy SearchRules Rule 1 Mode: AnyAlias
Zones Policy SearchRules Rule [1..2000] Name: <S: 0,50>
Descriptive name for the search rule.
Example: xConfiguration Zones Policy SearchRules Rule 1 Name: "DNS lookup"
Zones Policy SearchRules Rule [1..2000] Pattern Behavior: <Strip/Leave/Replace>
Determines whether the matched part of the alias is modified before being sent to the target zone. (Applies to
Alias Pattern Match mode only.)
Leave: the alias is not modified.
Strip: the matching prefix or suffix is removed from the alias.
Replace: the matching part of the alias is substituted with the text in the replace string.
Default: Strip
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern Behavior: Strip
Zones Policy SearchRules Rule [1..2000] Pattern Replace: <S: 0,60>
The string to substitute for the part of the alias that matches the pattern. (Applies to Replace pattern behavior
only.)
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern Replace: "@example.net"
Zones Policy SearchRules Rule [1..2000] Pattern String: <S: 0,60>
The pattern against which the alias is compared. (Applies to Alias Pattern Match mode only.)
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern String: "@example.com"
Cisco VCS Administrator Guide (X7.2) Page 440 of 498