Cisco TelePresence Administrator's Manual page 298

Field Description
FindMe ID The FindMe alias — the dialable
address — by which the user can be
contacted.
Principal The address or alias of the user's first
device principal device. An administrator (or
address users themselves) can add more
endpoint addresses after an account
has been created.
Password The password to be used, along with
the Username, when logging into
this account.
You must confirm any new or
modified password.
FindMe Specifies if the account is for an
type individual person or a group of
people, and affects how calls are
diverted when endpoints in the
user's primary list are busy.
Individual: calls immediately divert if
any primary endpoint is busy.
Group of people: calls immediately
divert only if all primary endpoints
are busy.
You can control general FindMe behavior, including whether users are allowed to add their own devices, on
the Configuring FindMe page.
Principal devices (Starter Pack)
The Principal devices section is used to specify the principal devices that are associated with the FindMe
user and to enable provisioning for those devices. This section only displays if the Starter Pack option key is
installed.
Principal devices are devices assigned to the user by the system administrator and cannot be deleted by the
FindMe user. Note that users can add other, non-principal, devices to their FindMe profiles.
To assign a principal device, select On for the relevant device type. The page will then display the URI that
will be assigned for that user and device type. You can assign as many devices as required.
The device URI is based on a combination of the Username, FindMe ID and device type. It takes the format
<username>.<device type>@<domain portion of FindMe ID>.
For example, if the Username is Alice.Smith and the FindMe ID is asmith@example.com, then the
URI for an E20 device would be alice.smith.e20@example.com.
Cisco VCS Administrator Guide (X7.2)
Usage tips
The FindMe ID can be any string of up to 60 characters.
However, not all endpoints are able to dial aliases with
spaces or other non-alphanumeric characters so we
recommend that these are not used in your FindMe IDs.
After the account has been created any non-principal
devices (including any devices added by FindMe users
themselves) can be set as principal devices. This has the
effect of stopping the user from being able to delete that
device. To do this, click Edit principal devices
user account page.
If the Starter Pack option key is installed, there is a
separate section for specifying the user's principal devices
(see below).
FindMe users can change their password after they have
logged in. Note that passwords are case sensitive, and that
the password fields are not shown if remote authentication is
enabled.
If the Starter Pack option key is installed all FindMe IDs are
created as Individual accounts.
Maintenance
from the Edit
Page 298 of 498