Cisco TelePresence Administrator's Manual page 189

scripts you are recommended to use an external
For information on the CPL syntax and commands that are supported by the VCS, see the
section.
Viewing existing CPL script
To view the Call Policy that is currently in place as an XML-based CPL script, go to the
configuration page (VCS configuration > Call Policy >
If Call Policy is configured to use a CPL script, this shows you the script that was uploaded.
n
If Call Policy is configured by the
n
policy rules.
If Call Policy mode is On but a policy has not been configured, this shows you a default CPL script that
n
allows all calls.
You may want to view the file to take a backup copy of the Call Policy, or, if Call Policy has been configured
using the Call Policy rules page you could take a copy of this CPL file to use as a starting point for a more
advanced CPL script.
If Call Policy has been configured using the
upload it back to the VCS without editing it, the VCS will recognize the file and automatically add each rule
back into the Call Policy rules
About CPL XSD files
The CPL script must be in a format supported by the VCS. The
to download the XML schemas which are used to check scripts that are uploaded to the VCS. You can use
the XSD files to check in advance that your CPL script is valid. Two download options are available:
Show CPL XSD file: displays in your browser the XML schema used for the CPL script.
n
Show CPL Extensions XSD file: displays in your browser the XML schema used for additional CPL
n
elements supported by the VCS.
Uploading a CPL script
To upload a new CPL file:
1. Go to the Call Policy configuration
CPL script cannot be uploaded using the command line interface.)
2. From the Policy files section, in the Select the new Call Policy file field, enter the file name or Browse
to the CPL script you want upload.
3. Click Upload file.
The VCS polls for CPL script changes every 5 seconds, so the VCS will almost immediately start using the
updated CPL script.
Deleting an existing CPL script
If a CPL script has already been uploaded, a Delete uploaded file button will be visible. Click it to delete the
file.
Cisco VCS Administrator Guide (X7.2)
policy service
Call Policy rules page, this shows you the CPL version of those call
Call Policy rules
page.
page (VCS configuration > Call Policy >
Dial plan and call processing
instead.
Configuration) and click Show Call Policy file.
page and you download the CPL file and then
Call Policy configuration
CPL reference
Call Policy
page allows you
Configuration). (The
Page 189 of 498