Reference material
Administration HTTP Mode: <On/Off>
Determines whether HTTP calls will be redirected to the HTTPS port. You must restart the system for any
changes to take effect.
On: calls will be redirected to HTTPS.
Off: no HTTP access will be available.
Default: On
Example: xConfiguration Administration HTTP Mode: On
Administration HTTPS Mode: <On/Off>
Determines whether the VCS can be accessed via the web interface. This must be On to enable both web
interface and TMS access. You must restart the system for any changes to take effect.
Default: On
Example: xConfiguration Administration HTTPS Mode: On
Administration HTTP Mode: <On/Off>
Determines whether HTTP calls will be redirected to the HTTPS port. You must restart the system for any
changes to take effect.
On: calls will be redirected to HTTPS.
Off: no HTTP access will be available.
Default: On
Example: xConfiguration Administration HTTP Mode: On
Administration HTTPS Mode: <On/Off>
Determines whether the VCS can be accessed via the web interface. This must be On to enable both web
interface and TMS access. You must restart the system for any changes to take effect.
Default: On
Example: xConfiguration Administration HTTPS Mode: On
Administration LCDPanel Mode: <On/Off>
Controls whether the LCD panel on the front of the VCS identifies the system.
On: the system name and first active IP address are shown.
Off: the LCD panel reveals no identifying information about the system.
Default: On
Example: xConfiguration Administration LCDPanel Mode: On
Administration SSH Mode: <On/Off>
Determines whether the VCS can be accessed via SSH and SCP. You must restart the system for any changes to
take effect.
Default: On
Example: xConfiguration Administration SSH Mode: On
Administration Telnet Mode: <On/Off>
Determines whether the VCS can be accessed via Telnet. You must restart the system for any changes to take
effect.
Default: Off
Example: xConfiguration Administration Telnet Mode: Off
Cisco VCS Administrator Guide (X7.2)
Page 404 of 498