Remote Management - TP-Link Archer C7 AC1750 User Manual

Archer C7 AC1750 Wireless Dual Band Gigabit Router
Choose menu "Security → Local Management", and then you can configure the management
rule in the screen as shown in Figure 4-68. The management feature allows you to deny
computers in LAN from accessing the router.
Figure 4-68 Local Management
By default, the radio button "All the PCs on the LAN are allowed to access the router's
Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to access
the Setup page of the router's Web-Based Utility locally from inside the network, check the radio
button "Only the PCs listed can browse the built-in web pages to perform Administrator
tasks", and then enter each MAC Address in a separate field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed can
use the password to browse the built-in web pages to perform Administrator tasks while all the
others will be blocked.
After click the Add button, your PC's MAC Address will be placed in the list above.
Click the Save button to save your settings.

Note:
If your PC is blocked but you want to access the router again, use a pin to press and hold the
WPS/Reset button (hole) on the back panel for about 5 seconds to reset the router's factory
defaults on the router's Web-Based Utility.
4.13.4

Remote Management

Choose menu "Security → Remote Management", and then you can configure the Remote
Management function in the screen as shown in Figure 4-69. This feature allows you to manage
your router from a remote location via the Internet.
- 77 -