TP-Link Archer C7 AC1750 User Manual page 23

3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
The router provides Auto-Detect function and supports five popular ways PPPoE, Dynamic IP, Static
IP, L2TP and PPTP to connect to the Internet. It's recommended that you make use of the
Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you can select
the very type and click Next to go on configuring.
4. If you select Auto-Detect, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the router.
1) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-7. Please select to clone the MAC address or not, according to your situation.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 3-5 Quick Setup
Figure 3-6 WAN Connection Type
- 12 -