TP-Link Archer C7 AC1750 User Manual page 95

Figure 4-76 Quick Setup – Create an Access Target Entry
Target Description - In this field, create a description for the target. Note that this

description should be unique (e.g. Target_1).
Mode - Here are two options, IP Address and Domain Name. You can choose either of

them from the drop-down list.
If the IP Address is selected, you will see the following items:
IP Address - Enter the IP address (or address range) of the target (targets) in
•
dotted-decimal format (e.g. 192.168.0.23).
Target Port - Specify the port or port range for the target. For some common service
•
ports, you can make use of the Common Service Port item below.
Protocol - Here are four options, All, TCP, UDP, and ICMP. Select one of them from the
•
drop-down list for the target.
Common Service Port - Here lists some common service ports. Select one from the
•
drop-down list and the corresponding port number will be filled in the Target Port field
automatically. For example, if you select "FTP", "21" will be filled in the Target Port
automatically.
If the Domain Name is selected, you will see the following items:
Domain Name - Here you can enter 4 domain names, either the full name or the
•
keywords (for example, google). Any domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed.
3. Click Next when finishing creating the access target entry, and the next screen will appear as
shown in Figure 4-77.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
- 84 -