TP-Link Archer C7 AC1750 User Manual page 133
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
2.
How do I configure the router to access Internet by Ethernet users?
1)
Login to the router, click the "Network" menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select "Dynamic IP" for "WAN Connection Type", finish by
clicking "Save".
2)
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, login to the router and click the "Network" menu link on the left of your browser,
and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC's MAC
address is proper MAC address, click the "Clone MAC Address" button and your PC's
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting.
3.
I want to use Netmeeting, what do I need to do?
1)
If you start Netmeeting as a host, you don't need to do anything with the router.
2)
If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3)
How to configure Virtual Server: Log in to the router, click the "Forwarding" menu on the
left of your browser, and click "Virtual Servers" submenu. On the "Virtual Servers"
page, click Add New.... Then on the "Add or Modify a Virtual Server Entry" page,
enter "1720" for the "Service Port" blank, and your IP address for the "IP Address" blank,
taking 192.168.0.169 for an example, remember to select the Status to be Enabled and
Save.
Archer C7
AC1750 Wireless Dual Band Gigabit Router
Figure A-3 MAC Clone
Figure A-4 Virtual Servers
- 122 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi