Security; Basic Security - TP-Link Archer C7 AC1750 User Manual
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable
button. This feature is enabled by default.
Current UPnP Settings List - This table displays the current UPnP information.
App Description - The description about the application which initiates the UPnP
request.
External Port - The port which the router opened for the application.
Protocol - The type of protocol which is opened.
Internal Port - The port which the router opened for local host.
IP Address - The IP address of the local host which initiates the UPnP request.
Status - Either Enabled or Disabled. "Enabled" means that the port is still active;
otherwise, the port is inactive.
Click the Enable button to enable UPnP.
Click the Disable button to disable UPnP.
Click the Refresh button to update the Current UPnP Settings List.
4.13 Security
Figure 4-65 The Security menu
There are four submenus under the Security menu as shown in Figure 4-65: Basic Security,
Advanced Security, Local Management and Remote Management. Click any of them, and you
will be able to configure the corresponding functions.
4.13.1
Basic Security
Choose menu "Security → Basic Security", and then you can configure the basic security in the
screen as shown in Figure 4-66.
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 73 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi
The TP-Link Archer C7 AC1750 is allowing your laptop to connect to WiFi, as shown by the laptop having an IP address (192.168.0.100) and being able to ping the router (192.168.0.1). However, access to the router's admin interface at http://192.168.0.1 times out. This issue is likely due to one of the following:
1. The router's web interface may be disabled or unresponsive.
2. A firewall or browser setting may be blocking access.
3. The router may need to be rebooted.
4. The connection may be on a guest network that blocks access to the admin page.
Try restarting the router, using a different browser or device, and ensuring you're connected to the main network, not a guest one.
This answer is automatically generated