TP-Link Archer C7 AC1750 User Manual page 63

Version - you can choose the version of the WPA-PSK security on the drop-down list.
•
The default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA)
or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the
find a notice in red as shown in
PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to
•
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the router or can be found in Figure 4-33.
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security on the drop-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2-Enterprise
find a notice in red as shown in Figure
Archer C7
WPA/WPA2-Personal
Figure
Figure 4-38 WPA/WPA2 – Personal
AC1750 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
4-38.
radio button and choose TKIP encryption, you will
4-39.
- 52 -