Appendix B: Configuring The Pcs - TP-Link Archer C7 AC1750 User Manual
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
Appendix B: Configuring the PCs
In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP.
First make sure your Ethernet Adapter is working, refer to the adapter's manual if needed.
1.
Install TCP/IP component
1)
On the Windows taskbar, click the Start button, point to Settings, and then click Control
Panel.
2)
Click the Network and Internet Connections icon, and then click on the Network
Connections tab in the appearing window.
3)
Right click the icon that showed below, select Properties on the prompt page.
4)
In the prompt page that showed below, double click on the Internet Protocol (TCP/IP).
Archer C7
AC1750 Wireless Dual Band Gigabit Router
Figure B-1
Figure B-2
- 126 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi
The TP-Link Archer C7 AC1750 is allowing your laptop to connect to WiFi, as shown by the laptop having an IP address (192.168.0.100) and being able to ping the router (192.168.0.1). However, access to the router's admin interface at http://192.168.0.1 times out. This issue is likely due to one of the following:
1. The router's web interface may be disabled or unresponsive.
2. A firewall or browser setting may be blocking access.
3. The router may need to be rebooted.
4. The connection may be on a guest network that blocks access to the admin page.
Try restarting the router, using a different browser or device, and ensuring you're connected to the main network, not a guest one.
This answer is automatically generated