Panel Layout; The Front Panel - TP-Link Archer C7 AC1750 User Manual
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (8 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
1.4
Panel Layout
1.4.1
The Front Panel
The router's LEDs are located on the front panel (View from left to right).
Name
(Power)
(System)
(Wireless
2.4GHz)
(Wireless
5GHz)
(Ethernet)
(Internet)
(WPS)
(USB on
the rear panel)
Archer C7
Figure 1-1 LEDs on the front panel
Status
Indication
Off
Power is off.
On
Power is on.
The router is initializing or maybe has a system error.
On
Flashing The router is working properly.
The router has a system error.
Off
Off
The wireless function is disabled.
The wireless function is enabled. The router is working on
Flashing
2.4GHz radio band.
Off
The wireless function is disabled.
The wireless function is enabled. The router is working on
Flashing
5GHz radio band.
Off
There is no device linked to the corresponding port.
There is a device linked to the corresponding port but there
On
is no activity.
Flashing There is an active device linked to the corresponding port.
Slow
A wireless device is connecting to the network by WPS
Flash
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On
network by WPS function.
Quick
A wireless device failed to be added to the network by WPS
Flash
function.
Off
No storage device or printer is plugged into the USB port.
On
A storage device or printer has connected to the USB port.
Table 1-1 The LEDs Description
AC1750 Wireless Dual Band Gigabit Router
- 4 -
Hide quick links:
Advertisement
Table of Contents
