TP-Link Archer C7 AC1750 User Manual page 29

Wireless Network Name - Enter a string of up to 32 characters. The same Name

(SSID) must be assigned to all wireless devices in your network. The default SSID is set
to be TP-LINK_xxxx(xxxx indicates the last unique four characters of each Router's
MAC address), which can ensure your wireless network security. But it is recommended
strongly that you change your networks name (SSID) to a different value. This value is
case-sensitive. For example, MYSSID is NOT the same as MySsid.
Region - Select your region from the drop-down list. This field specifies the region

where the wireless function of the router can be used. It may be illegal to use the
wireless function of the router in a region other than one of those specified in this field. If
your country or region is not listed, please contact your local government agency for
assistance.

Note:
Limited by local law regulations, version for North America does not have region
selection option.
Wireless Security

Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the router without encryption.
Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the

default PSK password the same as the default PIN code.
No Change - If you chose this option, wireless security configuration will not

change!
The above settings are only for basic wireless parameters. For advanced settings, please
check "More Advanced Wireless Settings", and then you can set the following parameters.
Band - This field displayed the operating frequency being configured.

Mode - This field determines the wireless mode which the router works on.

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless

clients.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
- 18 -