TP-Link Archer C7 AC1750 User Manual page 64

Radius Server IP - Enter the IP address of the Radius server.
•
Radius Port - Enter the port number of the Radius server.
•
Radius Password - Enter the password for the Radius server.
•
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a

notice in red as show in Figure 4-40.
Type - you can choose the type for the WEP security on the drop-down list. The default
•
setting is Automatic, which can select Shared Key or Open System authentication
type automatically based on the wireless station's capability and request.
WEP Key Format - Hexadecimal and ASCII formats are provided here
•
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
WEP Key - Select which of the four keys will be used and enter the matching WEP key
•
that you create. Make sure these values are identical on all wireless stations in your
network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
•
encryption. "Disabled" means this WEP key entry is invalid.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 4-39 WPA/WPA2 - Enterprise
Figure 4-40 WEP
- 53 -
.
Hexadecimal