Table of Contents
Advertisement
Chapter 13
13. 10. Remote Management
This feature allows you to control remote devices' authority to manage the router.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Enable
Remote
Management.
4. Keep the HTTPS Port and HTTP Port as the default settings.
5. Decide which remote device can access the router remotely. Select
allow all remote devices to access the router, or select
IP address to allow only the remote device using the specified IP address.
6. Click Save.
Now the specified remote device(s) can access the router from the internet via the
displayed
Web Address for
Note:
If a warning pops up when you visit the above address remotely, click Trust (or a similar option) to continue.
13. 11. System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
To save the system log locally:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to
Advanced
>
3. Choose the type and level of the system logs as needed.
4. Click
Save Log
to save the system logs to a local disk.
System Tools
> Administration.
Management.
System Tools
>
System
Specified Device
Log.
Manage the Router
All Devices
to
and enter an
95
Advertisement
Table of Contents
