Wireless Security - TP-Link Archer C7 AC1750 User Manual


Note:
1) The WPS LED on the router will light green for five minutes if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the Wireless Function of the router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
4.7.3

Wireless Security

Choose menu "Wireless 5GHz → Wireless Security", you can configure the security settings of
your wireless network.
There are five wireless security modes supported by the router: WPA-Personal, WPA2-Personal,
WPA-Enterprise, WPA2-Enterprise, and WEP.
Disable Security - If you do not want to use wireless security, check this radio button. But it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared

passphrase. The router is configured by this security type by default.
Archer C7 AC1750 Wireless Dual Band Gigabit Router
Figure 4-37 Wireless Security
- 51 -